An inspection quotation should define the work to be done and the evidence you will receive. We recommend checking seven areas: the service and inspection stage; the products, quantities, and factory location; the sampling plan and acceptance criteria; the checks and tests included; the visit schedule and report timing; the report contents and coverage limits; and the quotation’s validity, assumptions, and exclusions.
We are UTS. Our work covers product inspection, factory audits, supplier evaluation, and laboratory-test coordination. Our reports present actual findings only. They do not contain corrective-action plans, improvement recommendations, or shipment-release advice. The quotation checklist below is general guidance, not report content.
Service Type and Inspection Stage
The quotation should name the service and state when the goods must be ready. A description such as “product inspection” leaves the production stage unclear. Our published service pages describe these windows:
- Initial production inspection checks materials, specifications, and early production quality at about 5%–10% production completion.
- During-production inspection takes place when about 30%–50% of the goods are finished and packed into export cartons.
- Final random inspection takes place when production is 100% complete and at least 80% of the products are packed.
These are UTS service-stage references, not universal requirements for every inspection. Confirm the readiness conditions for your order. If the quotation covers several services, each should have a separate scope. An inspection is an examination against specified requirements; ISO/IEC 17020 describes the requirements for bodies performing inspection [1]. A product inspection report is not a product certificate or supplier approval.
Products, Quantities, and Factory Location
The quotation should identify the order or lot, product descriptions, models, sizes, colors, and SKUs. It should state the quantity by SKU and which variants are covered. Include carton counts and units per carton where available.
Give the actual factory or storage address where the goods will be inspected. If the order is split across sites, list each location and its quantity. Findings from goods checked at one site do not establish the condition of goods at another.
State the access needed to identify the lot and select cartons. If only part of the goods will be available, agree on the resulting coverage limit before the visit.
Sampling Plan and Acceptance Criteria
The quotation should identify the sampling standard and edition, inspection level, and how the sample size will be determined for the defined lot. ISO 2859-1 provides AQL-indexed sampling schemes for lot-by-lot inspection by attributes [2]. Naming a standard alone does not tell you which plan will be used for your order.
Ask how cartons and units will be selected, including coverage across SKUs. Random selection requires access to the agreed lot; relying only on items preselected by the factory does not establish a random sample.
Write the defect definitions and buyer-confirmed acceptance criteria into the scope. Our final inspection page lists commonly used criteria as Critical 0, Major 2.5, and Minor 4.0, subject to confirmation. Critical 0 means no critical defect is accepted in the inspected sample. Major 2.5 and Minor 4.0 are AQL values, not permission to accept those percentages of defects in every sample. The applicable plan determines the acceptance and rejection numbers. Sampling does not prove that the whole lot is defect-free.
Checks, Measurements, and Tests
The quotation should list the checks rather than leave them under a general “quality inspection” label. Depending on your product and agreed requirements, the scope may include:
- Quantity and assortment against the purchase order and packing list.
- Style, appearance, and workmanship against specifications and the approved sample reference.
- Dimensions and weight, with units and tolerances stated.
- Function checks, including the method, equipment, and factory conditions needed.
- Labels, markings, shipping marks, and packing condition.
- Barcode or QR-code scanning, where included. Specify the codes to be checked, the expected encoded data, and suitable scanning equipment and conditions. The inspected codes must achieve 100% scan success on the inspected samples, and decoded data must match the agreed product or label reference. This does not mean every unit in the lot was scanned or guarantee readability on every downstream device.
State which checks use the general inspection sample and which need a separately agreed quantity or method. A quoted visual inspection does not, by itself, include every function or safety test.
Laboratory testing needs a separate scope. If included, identify the products, test methods or standards, sample quantities, sample-selection and identification arrangements, and expected laboratory turnaround. Keep laboratory results distinct from on-site inspection findings; do not assume the two deliverables will arrive together.
Visit Schedule and Report Timing
The quotation should distinguish booking or deployment timing, the planned visit date and duration, and report delivery after the visit. Our inspection service pages publish deployment within 48 hours of booking and reporting within 24 hours after inspection. Treat these as published service references and confirm their applicability to your factory location, scope, and requested date.
Share any fixed deadline, such as the container loading date. Ask the quotation to identify any separate laboratory timeline. Do not turn deployment and report references into an assumed end-to-end completion date.
Report Contents and Coverage Limits
The quotation should describe the report deliverable: the lot and quantities presented, the sampling basis, the requirements used, actual measurements, completed test results, observed defects, and supporting photographs where applicable. Findings must stay tied to the goods and checks actually covered.
If goods are missing, access is restricted, or a check cannot be completed, the report should record that limitation. An unperformed check must not be presented as a passing result.
Our reports contain actual findings, not instructions for corrective action, improvement plans, or advice to release a shipment. Buyers may use the findings in their own decisions; the preparation guidance in this article remains separate from the report.
Validity, Assumptions, and Exclusions
Check the quotation’s validity period and the assumptions on which the scope depends. These may include goods being ready at the stated address, access to cartons, availability of required equipment, and receipt of the correct specifications or checklist version.
List excluded checks or tests explicitly. Agree in advance how changes of site, unavailable goods, additional tests, or a requested return visit will be handled. If the scope changes, ask our team to confirm the revised coverage in writing. A partial-lot visit must not be described as an inspection of the full order.
How Our Preparation Process Informs the Quotation
Our published initial production inspection process starts with purchase-order details, product specifications, the factory address, and a preferred date. We then review the specifications, prepare a customized inspection checklist, and confirm the inspection date with the factory. Those preparation steps explain why an order quantity alone is not enough to define the work.
Our sample evaluation service also examines samples against drawings, specifications, and design documents. For a quotation, identify which document revision or approved sample reference will govern the checks. If the reference changes, the inspection scope may need to change with it.
What to Send With Your Enquiry
To support a clear quotation, include these six inputs in your inspection enquiry:
- Product descriptions and the complete SKU or variant list.
- Order quantities by SKU and available packing details.
- Factory or storage addresses, including quantities at each site.
- Production status, preferred visit date, and fixed shipment deadlines.
- Purchase order, specifications, drawings, approved sample reference, and checklist or defect definitions.
- Requested on-site checks and any separate laboratory tests.
Quotation Review Checklist
Use these seven questions to compare the coverage in each quotation. Ask our team to clarify missing items before you confirm the visit.
- Which services and production stages are included, and what readiness conditions apply?
- Which lots, SKUs, quantities, and locations are covered, with what access?
- Which sampling plan, sample-size basis, defect definitions, and acceptance criteria apply?
- Which checks and tests are included, with what methods and quantities, and is laboratory testing separate?
- What are the planned visit date, duration, and report timeline?
- What will the report record, including limitations and uncompleted checks?
- How long is the quotation valid, and which assumptions, exclusions, and change arrangements apply?
Share your product details, factory location, and required checks with UTS so our team can review the inspection scope.
Request an Inspection Quotation