Tel
+852-61343425
News
-
What Do Supplier Assessment Services Check | 3 Key Factors
Professional assessments involve a rigorous audit of ISO Quality Systems, capacity utilization rates (required to be >80%), and financial statements from the last three years. This methodology effectively reduces supply chain disruption risks by 70% and eRead more -
DUPRO vs. Final Random Inspection | How to Choose for OEM Orders
In OEM manufacturing, During Production Inspection (DUPRO) is typically conducted when 20% to 80% of the products are completed. Its purpose is to identify defects early on, preventing major rework and shipping delays. Random Inspection (FRI), on the otheRead more -
Final Random Inspection Checklist | Key Quality Metrics
A Random Inspection (FRI) must be conducted once at least 80% of the order is packed. Following AQL sampling standards (such as 2.5/4.0), the process enforces a strict zero-tolerance policy for Critical defects, with a primary focus on evaluating functionRead more -
First-Time vs. Annual Factory Audit | How Often to Check
Initial audits prioritize the verification of credentials and production capacity, while annual audits are recommended every 12 months to ensure consistent quality. Any score falling below 70% triggers a mandatory re-audit within six months. Adhering to aRead more -
When to Book a Factory Audit | Sourcing vs. Pre-Production
We highly recommend conducting a factory audit prior to paying a deposit. During the sourcing phase, verifying ISO 9001 certification and production capacity can mitigate 80% of quality risks, while the pre-production stage should focus on checking raw maRead more
